A floating-point/multiple-precision processor for airborne applications

A compact input output (I/O) numerical processor capable of performing floating-point, multiple precision and other arithmetic functions at execution times which are at least 100 times faster than comparable software emulation is described. The I/O device is a microcomputer system containing a 16 bit microprocessor, a numerical coprocessor with eight 80 bit registers running at a 5 MHz clock rate, 18K random access memory (RAM) and 16K electrically programmable read only memory (EPROM). The processor acts as an intelligent slave to the host computer and can be programmed in high order languages such as FORTRAN and PL/M-86

Connecting remote systems for demonstration of automation technologies

An initial estimate of the communications requirements of the Systems Autonomy Demonstration Project (SADP) development and demonstration environments is presented. A proposed network paradigm is developed, and options for network topologies are explored

Quantifying numerical dispersion in non-orthogonal FDTD meshes

Numerical electromagnetic models such as FDTD are widely used for the design and analysis of structures, including antennas. Numerical dispersion is one of the main sources of error that degrade the accuracy of the results-for each structure of interest, the users of the model must attempt to generate a mesh that will avoid introducing high levels of dispersion. This is, however, especially difficult for non-orthogonal meshes since little information is available on the dispersion properties of the non-orthogonal FDTD algorithm on complex meshes. For the first time, the dispersion in realistic non-orthogonal FDTD models of microstrip structures is quantified directly through numerical simulations. A test structure is considered, discretised using a number of nonorthogonal mesh configurations, including single and multiple skew angles. A numerical analysis of reflections generated at the transition between two mesh regions with different skew angles is also presented. These results give a practical guide to mesh generation for users of the algorith

On the application and extension of Harten's high resolution scheme

Extensions of a second order high resolution explicit method for the numerical computation of weak solutions of one dimensonal hyperbolic conservation laws are discussed. The main objectives were (1) to examine the shock resoluton of Harten's method for a two dimensional shock reflection problem, (2) to study the use of a high resolution scheme as a post-processor to an approximate steady state solution, and (3) to construct an implicit in the delta-form using Harten's scheme for the explicit operator and a simplified iteration matrix for the implicit operator

A study of numerical methods for hyperbolic conservation laws with stiff source terms

The proper modeling of nonequilibrium gas dynamics is required in certain regimes of hypersonic flow. For inviscid flow this gives a system of conservation laws coupled with source terms representing the chemistry. Often a wide range of time scales is present in the problem, leading to numerical difficulties as in stiff systems of ordinary differential equations. Stability can be achieved by using implicit methods, but other numerical difficulties are observed. The behavior of typical numerical methods on a simple advection equation with a parameter-dependent source term was studied. Two approaches to incorporate the source term were utilized: MacCormack type predictor-corrector methods with flux limiters, and splitting methods in which the fluid dynamics and chemistry are handled in separate steps. Various comparisons over a wide range of parameter values were made. In the stiff case where the solution contains discontinuities, incorrect numerical propagation speeds are observed with all of the methods considered. This phenomenon is studied and explained

Toughening mechanism in elastomer-modified epoxy resins, part 2

The role of matrix ductility on the toughenability and toughening mechanism of elastomer-modified DGEBRA epoxies was investigated. Matrix ductility was varied by using epoxide resins of varying epoxide monomer molecular weights. These epoxide resins were cured using 4,4' diaminodiphenyl sulfone (DDS) and, in some cases, modified with 10% HYCAR(r)CTBN 1300X8. Fracture roughness values for the neat epoxies were found to be almost independent on the monomer molecular weight of the epoxide resin used. However, it was found that the fracture toughness of the elastomer-modified epoxies was very dependent upon the epoxide monomer molecular weight. Tensile dilatometry indicated that the toughening mechanism, when present, is similar to the mechanisms found for the piperidine cured epoxies in Part 1. SEM and OM corroborate this finding. Dynamic mechanical studies were conducted to shed light on the toughenability of the epoxies. The time-dependent small strain behavior of these epoxies were separated into their bulk and shear components. The bulk component is related to brittle fracture, whereas the shear component is related to yielding. It can be shown that the rates of shear and bulk strain energy buildup for a given stress are uniquely determined by the values of Poisson's ratio, nu. It was found that nu increases as the monomer molecular weight of the epoxide resin used increases. This increase in nu can be associated with the low temperature beta relaxation. The effect of increasing cross-link density is to shift the beta relaxation to higher temperatures and to decrease the magnitude of the beta relaxation. Thus, increasing cross-link density decreases nu and increases the tendency towards brittle fracture

Toughening mechanism in elastometer-modified epoxy resins: Part 1

Several plaques of Epon 828, cured with piperidine, modified with hycar(r) CTBN 1300X8, Hycar(R) CTBN 1300X13, and Hycar(R) CTBN 1300x15, and in some cases modified with biphenol A (BPA), yielded properly toughened epoxies with rubber particle diameters ranging from 0.1 to 10 microns. Fracture toughness experiments indicate that toughness was more a function of rubber content than the rubber particle size. Tensile volumetric behavior of the near resin exhibits two regions: an initial region where the increase in volume strain was due to the Poisson's effect, and a second region where a slower rate of increase in volume strain was due to shear deformation. Tensile volumetric deformation of an elastomer-modified epoxy exhibits the same type of behavior to that of the neat resin at low rates ( 3.2x0.01 sec(-1)). But at very high strain rates, which correspond more closely to the strain rates at the crack tip, there exists an increase in volume strain beyond the Poisson's effect. TEM, SEM and OM studies indicate that the rubber particles had voided. When a thin section from the deformed region is viewed under crossed-polarized light, shear bands are seen connecting voided rubber particles. From this information cavitation and enhanced shear band formation is proposed as the toughening mechanism

Long-term human hematopoiesis in the SCID-hu mouse.

Coimplantation of small fragments of human fetal thymus and fetal liver into immunodeficient SCID mice resulted in the formation of a unique structure (Thy/Liv). Thereafter, the SCID-hu mice showed reproducible and long-term reconstitution of human hematopoietic activity. For periods lasting 5-11 mo after transplantation, active T lymphopoiesis was observed inside the grafts and cells that were negative for T cell markers were found to have colony-forming units for granulocyte/macrophage (CFU-GM) and erythroid burst-forming unit (BFU-E) activity in the methylcellulose colony assay. In addition, structures similar to normal human bone marrow were observed inside the Thy/Liv grafts, consisting of blast cells, mature and immature forms of myelomonocytic cells, and megakaryocytes. These data indicate long-term maintenance, in vivo, of human progenitor cells for the T lymphoid, myelomonocytic, erythroid, and megakaryocytic lineages. The role of the implanted fetal liver fragments was analyzed using HLA-mismatched Thy/Liv implants. The HLA type of the liver donor was found on T cells and macrophages in the graft. In addition, cells grown in the methylcellulose colony assay and cells in a bone marrow-like structure, the thymic isle, expressed the HLA type of the liver donor. Thus, the Thy/Liv implants provided a microenvironment in which to follow human hematopoietic progenitor cells for multiple lineages. The formation of the Thy/Liv structures also results in a continuous source of human T cells in the peripheral circulation of the SCID-hu mouse. Though present for 5-11 mo, these cells did not engage in a xenograft (graft-versus-host) reaction. This animal model, the first in which multilineage human hematopoietic activity is maintained for long periods of time, should be useful for the analysis of human hematopoiesis in vivo

Motivational factors of Australian mobile gamers

Mobile games are a fast growing industry, overtaking all other video game platforms with year on year increases in revenue. Many studies have been conducted to explore the motivations of why video games players play their selected games. However very little research has focused on mobile gamers. In addition, Australian studies on the topic are sparse. This paper aimed to discover what motivates a mobile gamer from the perspective of the initial motivational factors attracting them to a mobile game, and the motivational factors that provide interest to continue playing and thereby increase game longevity. A survey was conducted online for Australian participants, which attracted 123 respondents. The survey was formulated by focusing on the 12 key subcomponents as motivational factors of the Gamer Motivational Profile v2 model devised by Quantic Foundry. It was discovered that mobile gamers are a completely different breed of gamer in contrast to the general video gamer. Strategy and challenge which are subcomponents of mastery proved popular among all mobile gamers, while destruction and excitement, subcomponents of action, were often the least motivating factors of all. With the newly discovered data, perhaps mobile game developers can pursue the correct avenues of game design when catering to their target audience